Page 1 of 2
FlatPress 1.5.1 - problem after installation
Posted: Wed Aug 26, 2026 9:33 am
by lantaca
Hi
i have try to upgrade from 1.4 dev version, and after a new fresh 1.5.1 version
after the upgrade, nothing works: the blog doesn't finde index, setup ecc ecc page.
after the new fresh installation, the situation is in the images below
Re: FlatPress 1.5.1 - problem after installation
Posted: Thu Aug 27, 2026 9:12 am
by lantaca
i have try to instal 3 times, but allweys the same result
now i have backload the 1.4 dev
and for test the 1.5.1 here
https://lantaca.altervista.org/fp151/
Re: FlatPress 1.5.1 - problem after installation
Posted: Thu Aug 27, 2026 10:15 am
by fraenkiman
Apparently, the “Blogbase URL” isn't clearly defined.
I see that you accessed the installed 1.5.1 instance via HTTPS.
- Unbenannt_01.png (2.53 KiB) Viewed 573 times
However, when I look at the source code, I find:
href="
http://lantaca.altervista.org/fp151/fp- ... /style.css...
- Unbenannt_02.png (5.34 KiB) Viewed 573 times
This causes the stylesheet to fail to load.
If possible, log in to the admin area and go to “Configuration.” Check there to see if the blog’s URL actually starts with https. If not, correct it.
Then clear the theme and template cache.
Re: FlatPress 1.5.1 - problem after installation
Posted: Thu Aug 27, 2026 10:33 am
by lantaca
Hi,
when I set the blog address to https, a new problem arises... ERR_TOO_MANY_REDIRECTS. so i can't go to clean the caches
and this is a new fresh installation without personalization
i have installed the 1.4.1
https://lantaca.altervista.org/fp141/ No problem here
i have installed the 1.5
https://lantaca.altervista.org/fp15/ same problem ERR_TOO_MANY_REDIRECTS
When installing version 1.4.1, my blog's address was automatically set to https://...
When installing versions 1.5 or 1.5.1, the address is set to http://..., and I have to change it manually.
Re: FlatPress 1.5.1 - problem after installation
Posted: Thu Aug 27, 2026 10:59 am
by fraenkiman
Check the file fp-content/config/settings.conf.php:
Code: Select all
$fp_config = array (
'general' =>
array (
'www' =>
lantaca wrote: Thu Aug 27, 2026 10:33 am
... so i can't go to clean the caches
Delete the
fp-content/cache and
fp-content/compile directories, for example, via FTP.
Re: FlatPress 1.5.1 - problem after installation
Posted: Thu Aug 27, 2026 11:45 am
by lantaca
Code: Select all
$fp_config = array (
'general' =>
array (
'www' => 'https://lantaca.altervista.org/fp151/',
'title' => 'FlatPress',
'subtitle' => 'My FlatPress blog',
'footer' => '',
'author' => 'Lantaca',
'email' => 'yxz@email.com',
'startpage' => NULL,
'maxentries' => 5,
'notify' => true,
'theme' => 'leggero',
'style' => 'stringendo',
'blogid' => 'fp-aabbccdd',
'charset' => 'utf-8',
),
cache deleted, but always ERR_TOO_MANY_REDIRECTS problem
Re: FlatPress 1.5.1 - problem after installation
Posted: Thu Aug 27, 2026 12:08 pm
by fraenkiman
I sent you a private message
[Solved] FlatPress 1.5.1 - problem after installation
Posted: Thu Aug 27, 2026 4:01 pm
by fraenkiman
Problem solved.
The Fp 1.5.1 instance is working now that I've tweaked the AlterVista patch in defaults.php.
https://lantaca.altervista.org/fp151/
Another 1.6.dev instance is working with a similar patch.
https://lantaca.altervista.org/fp16dev/
Re: FlatPress 1.5.1 - problem after installation
Posted: Fri Aug 28, 2026 12:32 pm
by lantaca
Thanks so much! Everything works. Will future versions have the fix, or do I need to save the default.php file?
Re: FlatPress 1.5.1 - problem after installation
Posted: Fri Aug 28, 2026 1:49 pm
by fraenkiman
Get the "defaults.php" file from fp16dev. I can’t really assess the risks and side effects for other web hosts at the moment. As of today, it remains the special "Lantaca solution" for now.